Відео

Do not buy the pro 180! It was missing the quest parts, the drain hose, and even the warranty card. With no water to my house I called them, and they said call back during business hours. I called today and got an automated voice response. No one was there, still have not got a return call. Fortunately, this is replacing an older unit and I was able to get by. Again, do not buy!!

Have a waterboss 900 at my place and it’s in demand mode, but for “soft water remaining” it show “00” is that normal?

Is the water hardness gpg? So if I’m 14 I would set the hd to 14?

Use the channel lock pliers properly. The opposite of the the way shown. Flip them over.

Proud to buy this American made softener. 👍🏻

does it come with the hose connectors?

On screen instruction: Air gap the drain pipe into the drain... Video shows: Drop the drain pipe into the sump basin. 😂

How do you clear E1 error on model 900

Older video that has tips included - ua-cam.com/video/aVZb93TO2aI/v-deo.html

Add two gallons of water… with the water still shut off? 🤦🏼‍♂️

Maybe make a video in a newer and cleaner basement that doesn't look like a medieval dungeon with a schitt covered pipe. Just saying.

This is horrible ! Nothing works ! It runs and runs and runs.

does it work with water 1800TDS and having high calcium level

My WB900 worked great for years. However; problem now after regeneration cycle, causes yellow to orange water. What do I need to do to fix this?

I have new 9 month old 980 waterboss softener. It goes through 4 40 pound bags of salt a month. Water is almost always above salt line. I’m so frustrated with this system and as a single person here in my home no plumber wants to work on it because they didn’t install it. What should I do? Or where can I start. I’ve been watching you tube videos and trying many of the options to know avail. Thx for any help.

How much is a typical installation cost?

So maybe warn ppl that when you regenerate, the water is going to come blasting out of the drain....also i did the regenerate thing twice and now my brine tank is too full. Also, you could have explained what each step is...1 regenerate, 2 ?, 3 ?, 4 tank refill

How much water should be in the brine tank?

It had to be in service... I feel dumb

I've had mine for five years and it has worked out well so far until I had to move it. I ended up stripping the plastic threads on the OUT and it looks like I would have to purchase the whole part. Very dissapointed. Bad, bad design. The GE they sell at home depot has removable plastic IN and OUt ports just incase this situation happens. I shouldn't have to buy a big expensive part for stripping a small plastic piece. I guess it is time to head down to home depot.

Literally the most difficult softener on earth to use. The online pdfs do not even state what any of the numbers on the screen mean or how to refill the softener with salt if you run completely out.

Hooked one up in my sons house several years ago. Works as it should. User friendly. Forget the negative reviews and go buy one.

Why does yours have 96H lit up? Mine doesn't.

Great video ,you got down to the specific s,this will be a breeze

Only holds at most 2 bags of salt pellets, have to use a stick to move salt around in the unit. I am on my second water boss and will never own another one. Not user friendly.

Not homeowner freindly to many modes nd 31 pages of instruction that is if u can find your serial number!! As none of them are the same!!

Waterboss 700 regenerate

I have a question. I have a new water boss 180 and there are cold and hot water pipes that seems to go to the water softner. No hot water should be going to the softner..right? Cold should go in..but where does the OUT line go too? Doesnt it go back into the cold line in a different spot? I think the previous owner had it set up wrong. Someone please help out...thanks

I have a unit and it ran out of salt, I disconnected it and after 2 days I filled the salt deposit now it is like in a loop there are numbers 1 2 3 4 water enters and does not evacuate it, it recharges. It won't let me do anything in the control panel. Thanks for the help Machine

Bought a WaterBoss 180 Pro from Menard’s about 6 months ago. It DID NOT come with Qest fittings. Those were extra items. Finding a plumber to install the unit was a challenge. Most local plumbers wouldn’t touch it. I finally found a pair of plumbers who would install a few weeks ago. The unit works well although it does drip where the line in is connected to the unit. The plumber used traditional copper fittings as he couldn’t find Qest fittings. Fingers crossed. I may attempt to re-do the connection myself, if I need too, and will order Qest fittings. WaterBoss really should include the required Qest fittings with the unit - as mentioned in this video tutorial - to eliminate the hassle of tracking them down, locally. Even if I was charged a few bucks more at the point of sale to have them included, it would be well worth it.

Video incorrect. Before adding salt you must put 2gals of water in unit.

Mine isn’t worked from day one and now they send a part and say yes call me and we will walk through a fix. Kidding me replace it morons. Not impressed then after watching fix they never sent parts to fix. Only one so it will happen again.

Do not buy this. Even worse, not at all a DIY. They switched the "normal" hot and cold/in and out so we have had to hire a plumber which will cost us $550. I think they owe us money.

This is promoted as a DIY project. However, it no longer comes with the Qest fittings, Menards to do not carry the Qest fittings so you have to call customer service to acquire them...dumb. Supposedly 2 days to get them. The old online manual says the fittings are included. Put them back in the box.

So I don't think these come with the "Qest" fittings anymore... mine sure didn't and the box states 1" female NPT fittings not included. Those would have made the installation easier.

Mine ran out of salt and had water in it now what

Most places dont even sell quest anymore so what do you use?

pray you NEVER have to call customer service, Worthless, waiting 2 days for a call back, mine is a 1.5 years old NOT IMPRESSED

Horrible dont buy any I have had to purchase one every two years !!!!!! not a very good product and the customer service is terrible and they don't stand behind their warranty rip off the unless you like to disassemble things and replace o rings for a hobby plastic wheels gears with as all magnet The last one I got all of the red settlement and resin from the resin bed kept washing out of the unit itself right after I purchased it and they asked me if I put it on its side The store clerk lowered it and the vehicle with a forklift and took it off the shelf the same way

I just installed one of these tonight and it did not come with the clamps to secure the drain line to the unit or is this extra?

awesome unit. very little that could go wrong as it has very limited parts. I've owned 1 on well water for over 10 years. also,it's not a product sold by a "salt" company meaning their not double dipping-its on demand-u never have to touch it but add salt even when power has been interrupted for hours! only issue-u need to grease the wheel mechanism with good grease-if not-it will chew the cycling wheel up-only thing I ever had to replace

I have never seen a check valve installed between a water softener and a water heater. The"norm" is a check valve before the water softener to prevent back flow into the main water supply and an expansion tank before the water heater. In addition, there was no by pass shown to be able to allow hard water to bypass the softener if, for any reason, the water softener needs to be serviced.

It seems like this is not met for homes that have a waterloop already installed in the home.

... and say a prayer that you never have to deal with the terrible "customer service" this company provides - and the warranty is truly worthless as they do not stand behind their products at all. Signed, Water Boss softener owner

As clearly done as the water I am expecting to drink. Many thanks.